Bow Fishing Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
121 Posts
you guys with smaller boats with the benches still in them, room is a factor for us. My boat is a 14-48 Alumicraft, not to cludder what little space we have is important & safe. Heres something I done with my fish barrel that saves on space & can move around without any problems.

I attached a 3/4" seat post base to the bottom of my fish barrel, sealed the holes were the bolts came through with sealent, and now I can place the barrel into a 3/4" seat pedestal

Picture14331_zpsd88e1461.jpg

Picture14332_zps14537917.jpg

Picture14335_zps664d302c.jpg

Picture14334_zps266d1680.jpg
 

· Registered
Joined
·
121 Posts
Discussion Starter · #4 ·
well Im going to make some modifactions to it this summer, get rid of the domed seat pedestal & order a more flatter one, another is the base for the seat pin, its domed too, & take a torch and try to heat it and flatten it out more this way the barrel will be more on the bench also.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top