Bow Fishing Forum banner

generator help

5738 Views 20 Replies 7 Participants Last post by  NuffDaddy
was going out tonight to try everything out for the season changed oil and spark plug on generator (powermate 8750 with yamaha motor) started fine but is not putting out any electric. any clues?
1 - 2 of 21 Posts
Do you have power to any of the recepticles if not take it cover off. Look for a fuse inside the recepticles cover. It'll be a glass fuse are it could be a blade fuse.

Sometimes the wires on the back of the recepticles could have come off from all the bouncing around.

Yes some of them has fuses. If that's not it then you may have a bad reset breaker.

1 - 2 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.